How to make Simple Robo Crane?

     Simple robo-crane can be built up by using raw materials available with you. Costing provided in this post is only for wheels, Motors, syringe, springs. Photo and videoas shown in this post are only a model. You can make your own robo. Imagination is yours!!

Operation:     Robo and crane, both are different from each other. However both can be used simultaneously by placing crane on robo (as shown in figure). Robo is handled by 2 two way switches And crane is handled by using 5 syringes. Crane is Operated by hydraulic power (Syringe as piston and cylinder). 8 springs are used to provide suspension.

Technical:

Wheel – Plastic wheels having diameter of 5 cm (approx.)

Motor  – 4 DC geared motor for each wheel (300-500rpm)

Supply – 12V 5mAh DC power supply.

Speciality:-

1. Semi independent spring suspension system to absorb shocks.

2. Damping mechanism

3. Hydraulic mechanism

4. Rough and tough

5. Less weight

6. Zero failure chances after manufacturing (till the date)

Material:

1. Cycle brake

2. Syringe (10 nos.)

3. Plastic tubular pipe (for structure)

Cost:

1. Raw material

2. Rs 200/- for crane

3. Rs 2000/- for Robo

Use: For lifting and shifting medium weight materials

Earlier presented: at Vision 2011, Walchand college of engineering, Sangli for Robo-exhibition and robo-race.

     If you have any quarries regarding this project, feel free to contact the project head;

Name: Mr. Mayur Potdar

Mobile no. (+91) 7709936877

E-mail address:  dpotdarmp@gmail.com